Share a USB Printer Through the Extender
63
AC1900 Nighthawk WiF Mesh Extender
To change the language:
1. Launch the NETGEAR USB Control Center.
2. Select Tools > Configuration.
The Control Center - Configuration screen displays.
3. In the Language menu, select a language.
4. Click the OK button.
The next time NETGEAR USB Control Center starts, the language changes.
To specify the time-out:
1. Launch the NETGEAR USB Control Center.
2. Select Tools > Configuration.
The Control Center - Configuration screen displays.
3. In the Timeout field, type the number of minutes.
The time-out period is the number of minutes that a computer holds its connection to the
USB printer when the connection is not being used.
4. Click the OK button.
Your changes are saved.