NETGEAR GC110 User Manual

Manage Device Security
285
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
7. From the Direction menu, select the packet filtering direction.
8. In the Sequence Number field, enter an optional sequence number.
You can specify an optional sequence number to indicate the order of this access list
relative to other access lists that are already assigned to the VLAN ID and selected
direction. A lower number indicates a higher precedence order. If a sequence number is
already in use for the VLAN ID and selected direction, the specified access list replaces
the currently attached ACL using that sequence number. If you do not specify a sequence
number (the value is 0), a sequence number that is one greater than the highest
sequence number currently in use for the VLAN ID and selected direction is used. The
valid range is 1 to 4294967295.
9. From the ACL Type menu, select the type of ACL.
Valid ACL types include IP ACL, MAC ACL, and IPv6 ACL.
10. From the ACL ID list, select the ID or name of the ACL that must be bound to the specified
VLAN.
11. Click the Add button.
The VLAN ACL binding is added.

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries