NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch User Manual

GS700TS Smart Switch Software Administration Manual
4-47 Configuring Switching Settings
v1.0, June 2009
2. Select the IGMP Snooping Status and Bridge Multicast Filtering Status in the provided
fields.
3. Click APPLY to update the device.
To configure IGMP Snooping on a VLAN:
1. Click Switching > Multicast > Advanced > IGMP Snooping Configuration.
The Advanced
IGMP Snooping Configuration screen displays.
2. Select the VLAN ID entry in the Interface Settings table.
3. Select the Status and Auto Learn status from the lists in the provided fields in the first row.
4. Enter the Host, MRouter and Leave Timeouts in the provided fields in the first row.
5. Click APPLY to update the device.
Multicast Group Configuration
The Multicast Group Configuration screen contains fields for creating, deleting and modifying
Multicast service groups. The Multicast Group Configuration table contains up to 32 Multicast
service groups.
To configure Multicast groups:
1. Click Switching > Multicast > Advanced > Multicast Group Configuration.
The Multicast
Group Configuration screen displays:
The Multicast Group Configuration screen contains the following information:
• VLAN ID – Displays the VLAN ID.
Figure 4-29

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Specifications

General

Brand	NETGEAR
Model	GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch
Category	Switch
Language	English