NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch User Manual

GS700TS Smart Switch Software Administration Manual
6-4 Managing Security
v1.0, June 2009
• Active – Select the priority in which the system performs authentication with a RADIUS
Server. The system performs authentication initially with the RADIUS Primary Server,
and if it fails, it performs authentication with the RADIUS Backup Server. The possible
values are:
– Primary – Defines the RADIUS Primary Server.
– Backup – Defines the RADIUS Backup Server.
2. Select the RADIUS Server entry.
3. Enter the Host IP Address, Authentication Port, Number of Retries, Timeout for Reply,
Dead Time and Key String in the provided fields in the first row.
4. Select the Usage Type and Active Server from the lists in the provided fields in the first row.
5. Click APPLY to update the device.
To add a new RADIUS Server entry:
1. Click Security > Management Security > RADIUS. The RADIUS screen displays.
2. Enter the Host IP Address, Authentication Port, Number of Retries, Timeout for Reply,
Dead Time and Key String in the provided fields in the first row.
3. Select the Usage Type and Active Server from the lists in the provided fields in the first row.
4. Click ADD to update the device.
To remove a RADIUS Server entry:
1. Click Security > Management Security > RADIUS. The RADIUS screen displays.
2. Select the RADIUS Server entry.
3. Click DELETE to remove the entry.
Accounting Server Configuration
RADIUS accounting enables recording of device management sessions (web login/logout but not
SNMP) as well as 802.1x authentication sessions.To configure RADIUS Accounting Servers:
1. Click Security > Management Security > RADIUS > Accounting Server Configuration.
The RADIUS Accounting Server Configuration screen displays

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Specifications

General

Brand	NETGEAR
Model	GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch
Category	Switch
Language	English