NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch User Manual

GS700TS Smart Switch Software Administration Manual
Managing Security 6-5
v1.0, June 2009
The RADIUS Accounting Server Configuration screen contains the following fields:
• Accounting Mode – Select the RADIUS accounting method. The possible field values
are:
– None – Indicates RADIUS accounting is disabled. This is the default.
– 802.1x – Indicates 802.1x authentication sessions are recorded.
– Login – Indicates device management (Web login and logout) sessions are recorded.
– Both – Indicates both 802.1x authentication and device management sessions are
recorded.
• Accounting Server Address – Select the RADIUS Accounting Server IP address.
• Accounting Port – Enter the RADIUS Accounting port number. The accounting port is
used to handle RADIUS server accounting. The field default is 1813.
2. Select the RADIUS Accounting Mode from the list in the provided field.
3. Select the RADIUS Accounting Server Address from the list in the provided field.
4. Enter the RADIUS Accounting Port in the provided field.
5. Click APPLY to update the device.
Figure 6-3

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Specifications

General

Brand	NETGEAR
Model	GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch
Category	Switch
Language	English