GS700TS Smart Switch Software Administration Manual
Managing System Settings 3-46
v1.0, June 2009
– Streaming Video – Indicates the network policy is defined for a Streaming Video
application.
– Video Signaling – Indicates the network policy is defined for a Video Signaling
application.
• VLAN ID – Enter the VLAN ID for which the network policy is defined.
• VLAN Type – Select the VLAN type for which the network policy is defined. The
possible field values are:
– Tagged – Indicates the network policy is defined for tagged VLANs.
– Untagged – Indicates the network policy is defined for untagged VLANs.
• User Priority – Select the priority assigned to the network application. The field range is
0 - 7.
• DSCP Value – Select the DSCP value assigned to the network policy. The possible field
value is 0 - 63.
2. Select the Network Policy entry to configure.
3. Select the Network Policy Number from the list in the provided field in the first row.
4. Enter the VLAN ID in the provided field in the first row.
5. Select the VLAN Type from the list in the provided field in the first row.
6. Select the User Priority from the list in the provided field in the first row.
7. Select the DSCP Value from the list in the provided field in the first row.
8. Click APPLY to update the device.
To add a new network policy entry:
1. Click System > LLDP > Advanced > LLDP-MED Network Policy. The LLDP-MED
Network Policy screen displays.
2. Select the Network Policy Number from the list in the provided field in the first row.
3. Enter the VLAN ID in the provided field in the first row.
4. Select the VLAN Type from the list in the provided field in the first row.
5. Select the User Priority from the list in the provided field in the first row.
6. Select the DSCP Value from the list in the provided field in the first row.
7. Click ADD to update the device.
To Next Page
Loading...
Need help?
General