NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch User Manual

GS700TS Smart Switch Software Administration Manual
3-51 Managing System Settings
v1.0, June 2009
• VLAN Type – Displays the VLAN type for which the network policy is defined. The
possible field values are:
– Tagged – Indicates the network policy is defined for tagged VLANs.
– Untagged – Indicates the network policy is defined for untagged VLANs.
• User Priority – Displays the network policy user priority.
• DSCP – Displays the network policy DSCP.
3. Click the Network Policies gold bar to display the network policies applied to the port.
Neighbors Information
The LLDP Neighbors Information screen contains information received from neighboring device
LLDP advertisements.
To view LLDP neighbors information:
1. Click System > LLDP > Advanced > Neighbors Information. The LLDP Neighbors
Information screen displays:
The LLDP Neighbors Information screen contains the following fields:
• MSAP Entry – Displays the device’s Media Service Access Point (MSAP) entry number.
• Local Port – Displays the port number.
• Chassis ID SubType – Displays the chassis ID subtype. For example, MAC address.
• Chassis ID – Displays the chassis identification of the device transmitting the LLDP
frame.
Figure 3-27

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch Specifications

General

Brand	NETGEAR
Model	GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch
Category	Switch
Language	English