NETGEAR GS748T GS748T GS748T User Manual

GS748T Smart Switch Hardware Installation Guide
Introduction 1-5
v1.0, January 2007
Package Contents
Figure 1-1 shows the package contents of the NETGEAR GS748T Gigabit Smart Switch.
Figure 1-1 Package Contents
Verify that your package contains the following:
• GS748T Gigabit Smart Switch
• Rubber footpads for tabletop installation
• Power cord
• 19-inch rack-mount kit
• Installation guide
• Smart Switch Resource CD with Smart Wizard Discovery Utility, and Hardware and User’s
manuals
• Warranty/Support Information Card
If any item is missing or damaged, contact your point-of-purchase representative immedi-
ately.

NETGEAR GS748T GS748T GS748T Specifications

General

Model Number	GS748T
Product Type	Switch
Ports	48
SFP Ports	4
Form Factor	Rack-mountable
Layer	Layer 2
Switching Capacity	96 Gbps
Forwarding Rate	71.4 Mpps
MAC Address Table Size	16K
Jumbo Frame Support	Yes
VLAN Support	Yes
Number of VLANs	256
Quality of Service (QoS)	Yes
PoE	No
Stackable	No
Port Type	Gigabit Ethernet
Management	Yes
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	90% maximum relative humidity, noncondensing