NETGEAR GS748T GS748T GS748T User Manual

GS748T Smart Switch Hardware Installation Guide
4-6 Installation
v1.0, January 2007
Step 7: Management through a Web Browser or Utility
Program (Initial Configuration)
Your NETGEAR GS748T Gigabit Smart Switch has embedded management software for viewing,
changing, and monitoring its activity and configuration. You need not use this management
software for it to function as a simple switch. However, the management software enables you to
set up advanced features such as VLANs and Trunking and also enables you to configure the
switch for improved efficiency and performance. As a result, you can improve the overall
performance of your network.
After you power-up the switch for the first time, you can configure it using a Web browser or a
utility program called Smartwizard Discovery. For more information about managing the switch,
see the User Manual on the Smart Switch Resource CD.

NETGEAR GS748T GS748T GS748T Specifications

General

Model Number	GS748T
Product Type	Switch
Ports	48
SFP Ports	4
Form Factor	Rack-mountable
Layer	Layer 2
Switching Capacity	96 Gbps
Forwarding Rate	71.4 Mpps
MAC Address Table Size	16K
Jumbo Frame Support	Yes
VLAN Support	Yes
Number of VLANs	256
Quality of Service (QoS)	Yes
PoE	No
Stackable	No
Port Type	Gigabit Ethernet
Management	Yes
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	90% maximum relative humidity, noncondensing