NETGEAR GS748T GS748T GS748T User Manual

2-1
v1.0, January 2007
Chapter 2
Physical Description
This chapter describes the hardware features of the NETGEAR GS748T Gigabit Smart Switch.
Topics include:
• Front and back panels
• 10/100/1000 Mbps auto-sensing RJ-45 ports
• SFP GBIC Module bay
• LED descriptions
• Reset button
• Factory defaults button
Front and Back Panels
Figure 2-1 and Figure 2-2 show the key components on the front and back panels of the
NETGEAR GS748T Gigabit Smart Switch.
Figure 2-1 GS748T Gigabit Smart Switch—Front Panel
Figure 2-2 GS748T Gigabit Smart Switch—Rear Panel

NETGEAR GS748T GS748T GS748T Specifications

General

Model Number	GS748T
Product Type	Switch
Ports	48
SFP Ports	4
Form Factor	Rack-mountable
Layer	Layer 2
Switching Capacity	96 Gbps
Forwarding Rate	71.4 Mpps
MAC Address Table Size	16K
Jumbo Frame Support	Yes
VLAN Support	Yes
Number of VLANs	256
Quality of Service (QoS)	Yes
PoE	No
Stackable	No
Port Type	Gigabit Ethernet
Management	Yes
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	90% maximum relative humidity, noncondensing