NETGEAR GS748T GS748T GS748T User Manual

GS748T Smart Switch Hardware Installation Guide
2-4 Physical Description
v1.0, January 2007
Figure 2-3 Reset Button of the GS748T Gigabit Smart Switch
Restore Factory Defaults Button
The Restore Factory Default button of the GS748T Smart Switch enables you to clear the current
settings and return the switch to its factory default configuration. This function clears all settings,
including the password, VLAN settings, and port configurations. To perform this operation, insert
a device such as a paper clip into the opening to press the recessed button.

NETGEAR GS748T GS748T GS748T Specifications

General

Model Number	GS748T
Product Type	Switch
Ports	48
SFP Ports	4
Form Factor	Rack-mountable
Layer	Layer 2
Switching Capacity	96 Gbps
Forwarding Rate	71.4 Mpps
MAC Address Table Size	16K
Jumbo Frame Support	Yes
VLAN Support	Yes
Number of VLANs	256
Quality of Service (QoS)	Yes
PoE	No
Stackable	No
Port Type	Gigabit Ethernet
Management	Yes
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	90% maximum relative humidity, noncondensing