- 10G multispeed ports (also supporting 5 Gbps, 2.5 Gbps, 1 Gbps, and 100M
speeds), depending on the model
-
25G SFP28 or 10G SFP+ fiber uplink ports, depending on the model
•
Support for switching fabric from 128 Gbps to 680 Gbps, depending on the model,
with all ports at line-rate
•
One out-of-band (OOB) 1G Ethernet RJ-45 port
•
One USB Type-C console port
•
Two USB 3.0 ports for connections to storage devices
•
Full-width or half-width 1U chassis
•
Full compatibility with IEEE standards:
- IEEE 802.3 (Ethernet )
- IEEE 802.3u (100BASE-TX)
- IEEE 802.3ab (1000BASE-T)
- IEEE 802.3bz (2.5GBASE-T)
- IEEE 802.3z (1000BASE-SX/LX)
- IEEE 802.3ae (10GBASE-SR, 10GBASE-LR)
- IEEE 802.3bq (25GBASE-T)
-
IEEE 802.3x Full-duplex flow control
- IEEE 802.3ad Link aggregation (LAG with LACP)
-
IEEE 802.3az Energy Efficient Ethernet (EEE)
-
IEEE 802.3af (PoE)
- IEEE 802.3at (PoE+)
- IEEE 802.3bt (PoE++)
-
IEEE 802.1AS-2011 Timing and Synchronization for Time-Sensitive Applications
(generalized Precision Time Protocol [gPTP])
-
IEEE 802.1Qav-2009 Forwarding and Queuing Enhancements for Time-Sensitive
Streams (FQTSS)
- IEEE 802.1Qat-2010 Stream Reservation Protocol (SRP)
- IEEE 802.1BA-2011 Audio Video Bridging (AVB) Systems
•
AutoSensing and autonegotiating capabilities for all ports
•
Auto Uplink™ technology support on all ports
Hardware Installation Guide7Introduction
Fully Managed Switches M4350 Series
To Next Page
Loading...
