Mobile Broadband Wireless-N Router MBRN3000 User Manual
Configuring Your Router to the Internet 1-5
v1.0, October 2009
3. Place your router in a suitable area for installation (near an AC power outlet and accessible to
the Ethernet cables for your wired computers).
Logging In to Your Router
When you first connect to your router during installation, a Setup Wizard appears. For help using
the Setup Wizard to configure your Internet and wireless network, see the Mobile Broadband
Wireless-N Router MBRN3000 Installation Guide
After the initial configuration, you can use your Web browser to log into the router to router to
view or change its settings. Links to Knowledge Base and documentation are also available on the
router main menu.
When you have logged in, if you do not click Logout, the router waits for 5 minutes after no
activity before it automatically logs you out.
To log in to the router:
1. Type http://www./routerlogin.net, or http://www.routerlogin.com, or the router’s LAN IP
address (default is 192.168.0.1) in the address field of your browser, and then press Enter. A
login window displays:
Note: Your computer must be configured for DHCP. For help with configuring DHCP, see
the documentation that came with your computer or see the link to the online
document in “Preparing Your Network” in Appendix B.
Figure 1-1
To Next Page
Loading...
Need help?
General
