Mobile Broadband Wireless-N Router MBRN3000 User Manual
3-12 Protecting Your Network
v1.0, October 2009
Setting Your Time Zone
To localize the time for your log entries, you must specify your time zone:
1. Log in to the router at its default LAN address of http://192.168.0.1 with its default user name
of admin, default password of password, or using whatever password and LAN address you
have chosen for the router.
2. On the main menu, select Schedule to display the Schedule screen:
3. Select your time zone. This setting will be used for the blocking schedule according to your
local time zone and for time-stamping log entries.
If your time zone is currently in daylight savings time, select the Adjust for daylight savings
time check box.
4. The router has a list of NETGEAR NTP servers. If you prefer to use a particular NTP server as
the primary server, enter its IP address in the Use this NTP Server field.
5. Click Apply to save your settings.
Figure 3-10
Note: If your region uses daylight savings time, you must manually select Adjust for
Daylight Savings Time on the first day of daylight savings time, and clear it at
the end. Enabling daylight savings time causes 1 hour to be added to the
standard time.
To Next Page
Loading...
Need help?
General
