Mobile Broadband Wireless-N Router MBRN3000 User Manual
1-8 Configuring Your Router to the Internet
v1.0, October 2009
2. Select Broadband Settings, and the following screen displays:
The following buttons are available:
• Click Connect when you want to manually connect to the network.
Figure 1-4
Table 1-1. Broadband Settings fields
Fields and Checkboxes Description
Username Internet account login username
Password Internet account password for authentication
Pin code Pin code of the SIM card, where applicable
Network name/APN ISP network name
PDP type Type of packet data protocol
Connect automatically at startup If this checkbox is selected, the modem automatically connects to the
network when powered up. This should be selected after login
information is provided.
Reconnect automatically when
connection is lost
If this check box is selected, the modem will attempt to reconnect to the
network when the connection is lost. Under normal situation, this
setting should be selected.
Connect only to preferred
operators
If this checkbox is cleared (not selected) the unit may roam to any
available operator in range and may incur roaming charges.
Connection status Current WAN port status
To Next Page
Loading...
Need help?
General
