Mobile Broadband Wireless-N Router MBRN3000 User Manual
A-2 Technical Specifications and Factory Default Settings
v1.0, October 2009
Factory Default Settings
You can use the Restore Factory Settings button that is located on the bottom of your router to
reset all settings to tehir factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory
configiuration settings that are shown in the following table.
Feature Default Behavior
Router Login
User login URL http://www.routerlogin.net or http://www.routerlogin.com
User name (case sensitive) admin
Login password (case sensitive) password
Internet Connection
WAN MAC address Use default address
WAN MTU size 1492
Port speed AutoSense
Local Network (LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Disabled
Time zone PST for North America, GMT for other locations
Time zone adjusted for daylight saving
time
Disabled
Firewall
To Next Page
Loading...
Need help?
General
