EasyManuals Logo

NETGEAR MS108EUP Hardware Installation Guide

NETGEAR MS108EUP
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
The screws and anchors are in the switch package.
4. Insert the anchors into the wall and tighten the screws with a No. 2 Phillips screwdriver.
Leave about ¼ inch (6 mm) of each screw protruding from the wall so that you can
insert the screws into the holes on the bottom of the switch.
5.
Line up the holes on the bottom panel of the switch with the screws in the wall and
mount the switch to the wall.
You can mount the switch with the front panel facing down (the Ethernet cables will
be at the bottom, see the upper figure) or facing up (the Ethernet cables will be at
the top, see the lower figure).
Hardware Installation Guide23Installation
8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

Other manuals for NETGEAR MS108EUP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR MS108EUP and is the answer not in the manual?

NETGEAR MS108EUP Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3
Quality of Service (QoS) supportYes
Installed SFP modules quantity-
Basic switching RJ-45 Ethernet ports type2.5G Ethernet (100/1000/2500)
Basic switching RJ-45 Ethernet ports quantity8
10G supportNo
Number of VLANs64
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x
Virtual LAN featuresPort-based VLAN, Tagged VLAN
Copper ethernet cabling technology100BASE-T, 1000BASE-T
Jumbo frames12000
MAC address table16000 entries
Packet buffer memory1.5 MB
DHCP featuresDHCP client
Queue scheduling algorithmsStrict Priority Queue (SPQ), Weighted Round Robin (WRR)
Number of multicast groups filtered128
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)0 - 90 %
Total Power over Ethernet (PoE) budget230 W
Power sourcePoE
Mean time between failures (MTBF)373644 h
CertificationCE FCC 15 B CE/EN55032/24 CSA VCCI ACMA KC CCC BSMI
Product colorGray
Housing materialMetal
Weight and Dimensions IconWeight and Dimensions
Depth140 mm
Width210 mm
Height40 mm
Weight900 g

Related product manuals