NETGEAR Nighthawk M1 User Manual

When you are using an Ethernet connection, you can use the USB type C cable and the AC adapter to
recharge the mobile router battery.
You cannot use an Ethernet connection and use a tethered connection to access the
mobile router at the same time.
Note
For information about offloading data, see Offload Your Mobile Internet Connection on page 30.
For information about how to use a charge-only tethered connection, see Use the USB Type C Cable
to Charge Only on page 23.
• TS9 antenna connectors.Two SMK-TS9 connectors for an optional MIMO antenna.
For more information about connecting an external antenna, see External Antennas on page ?.
Optional Accessories
The following optional accessories are also supported:
• Optional micro SD card (sold separately)
• Optional antennas (sold separately)
For more information, visit netgear.com/XXXXaccessories.
Install the Micro SIM Card and the Battery
To obtain an activated micro SIM (3FF format) card, contact AT&T.
Get Started
11
Nighthawk LTE Mobile Hotspot Router Model MR1100

NETGEAR Nighthawk M1 Specifications

General

Model	MR1100
WiFi Technology	802.11ac
WiFi Speed	Up to 1 Gbps
Battery	5040 mAh
Dimensions	105.5 x 105.5 x 20.35 mm
Weight	240 g
LTE Category	LTE CAT 16
Max Theoretical Downlink Speed	1 Gbps
Max Theoretical Uplink Speed	150 Mbps
Wi-Fi Bands	2.4 GHz, 5 GHz
Wi-Fi Max Theoretical Speed	1 Gbps
SIM Type	Nano SIM
Ethernet Ports	1 x Gigabit Ethernet
USB Ports	1 x USB 3.0
SIM Card Slot	Yes (Nano)
External Antenna Ports	2 TS-9 connectors