NETGEAR Nighthawk M1

Table 1. Power button usage
ActionDesired Result
Press and hold the Power button for three seconds.Turn on the mobile router.
Press and hold the Power button for five seconds.Turn off the mobile router.
Press and quickly release the Power button.Wake the mobile router.
Press and quickly release the Power button.Switch between screens.
Status LED
The status LED indicates the mobile router’s connection status.
Table 2. LED indicator patterns
What the Pattern MeansLED
The mobile router is ready.Slow blue blink
The mobile router is transferring data.Fast blue blink
The mobile router is not ready.Slow amber blink
LCD Screen
The LCD screen displays information shown in the following figure.
1 2
3
4
5
Figure 2. LCD screen
DescriptionNumber
Signal strength1
Network type2
Get Started
9
Nighthawk LTE Mobile Hotspot Router Model MR1100