NETGEAR Nighthawk M1 User Manual

a. Click the ADD button
b. Complete the fields.
c. Click the ADD button.
The Cellular page displays the APN.
d. To make this APN the active APN, click the radio button next to the APN name.
e. Click the SAVE button.
The APN is now the active APN. The Cellular Settings page also displays a check box next to the
new APN name. This check box lets you select the APN so that you can delete it.
The page does not display a check box next to the default APN name because
you cannot delete that APN.
Note
7. Click the Apply button.
Your settings are saved.
Enable VPN Service
To connect to a corporate network using VPN, you must first enable VPN service.
Manage Your Internet Connection
35
Nighthawk LTE Mobile Hotspot Router Model MR1100

NETGEAR Nighthawk M1 Specifications

General

Model	MR1100
WiFi Technology	802.11ac
WiFi Speed	Up to 1 Gbps
Battery	5040 mAh
Dimensions	105.5 x 105.5 x 20.35 mm
Weight	240 g
LTE Category	LTE CAT 16
Max Theoretical Downlink Speed	1 Gbps
Max Theoretical Uplink Speed	150 Mbps
Wi-Fi Bands	2.4 GHz, 5 GHz
Wi-Fi Max Theoretical Speed	1 Gbps
SIM Type	Nano SIM
Ethernet Ports	1 x Gigabit Ethernet
USB Ports	1 x USB 3.0
SIM Card Slot	Yes (Nano)
External Antenna Ports	2 TS-9 connectors