NETGEAR Nighthawk M1 User Manual

Depending on your selection, the page displays an Allow List or a Block List.
7. To add a device to the list, click the ADD button and select the device.
The device is added to the list.
8. To remove a device from the list, select the device and then click the DELETE button.
The device is removed from the list.
Turn Off USB Tethering
USB tethering lets you connect to the Internet from supported computers with a USB cable and charge the
mobile router battery at the same time.
Figure 7. Mobile router tethered to a laptop computer
Turn off USB tethering if you only want to charge your mobile router with your computer.
Turn Off USB Tethering From the NETGEAR Mobile App
To turn off tethering:
1. On your smartphone, connect to the mobile router’s WiFi network.
2. Launch the NETGEAR Mobile app.
3. Swipe down.
The dashboard displays.
4.
Tap Settings.
The Settings page displays.
5. Tap General.
The General page displays.
6. Under ROUTER, tap Tethering to toggle between Charge only and Charge + tether.
Control Internet Access
40
Nighthawk LTE Mobile Hotspot Router Model MR1100

NETGEAR Nighthawk M1 Specifications

General

Model	MR1100
WiFi Technology	802.11ac
WiFi Speed	Up to 1 Gbps
Battery	5040 mAh
Dimensions	105.5 x 105.5 x 20.35 mm
Weight	240 g
LTE Category	LTE CAT 16
Max Theoretical Downlink Speed	1 Gbps
Max Theoretical Uplink Speed	150 Mbps
Wi-Fi Bands	2.4 GHz, 5 GHz
Wi-Fi Max Theoretical Speed	1 Gbps
SIM Type	Nano SIM
Ethernet Ports	1 x Gigabit Ethernet
USB Ports	1 x USB 3.0
SIM Card Slot	Yes (Nano)
External Antenna Ports	2 TS-9 connectors