The mobile router checks for firmware updates. If an updated is available, it is automatically downloaded.
7. Tap INSTALL UPDATE.
After the update install completes, a success message displays.
Update the Firmware From the Web Page
To update firmware using the mobile router web page:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays. If a firmware update is available, a blue INSTALL NEW FIRMWARE link
displays on the right.
4. Click the INSTALL NEW FIRMWARE link.
The update downloads.
5. Follow the onscreen instructions to install the update.
After the update completes, the mobile router reboots.
Change the admin Password
The admin password is used to log in to the mobile router with the user name admin.This password is not
the one that you use for WiFi access.
When you used the NETGEAR Mobile app to set up the mobile router, you changed the admin password.
To change it again, you must use web browser access from a computer.The ideal password contains no
dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols.
To change admin password:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Administration > Set Password.
The Set Password page displays.
Manage Your Mobile Router Network
67
Nighthawk LTE Mobile Hotspot Router Model MR1100
To Next Page
Loading...
Need help?
General
