Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
3-6 Basic Installation and Configuration
July 2005 v3.0
2CONFIGURE LAN AND WIRELESS ACCESS
a. Configure the WG302 Ethernet port for LAN access.
• Connect to the WG302 by opening your browser and entering http://192.168.0.228 in
the address field. A login window like the one shown below opens:
Figure 3-2: Login window
• When prompted, enter admin for the user name and password for the password, both
in lower case letters.
To Next Page
Loading...
