NETGEAR WG302 - 802.11g ProSafe Wireless Access Point User Manual

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
4-4 Management
July 2005 v3.0
Using Syslog and Activity Log Information
The Information contains the activity log link you can use for setting up a syslog server and
viewing activity log information. From the main menu of the browser interface, under the
Information heading, click the Station List link to view the list, shown below:
Figure 4-3: Syslog and Activity Log information
Enable the SysLog option if you have a SysLog server on your LAN. If enabled, you must enter
the IP address of your SysLog server and the port number your SysLog server is configured to use.
• SysLog Server IP address: The access point will send all the SysLog to the specified IP
address if SysLog option is enabled. Default: 0.0.0.0
• Port: The port number configured in the SysLog server on your LAN. Default: 514
The Activity Log Window displays the Access Point system activity.
You may click Refresh to update the display or Click Save As. To save the log contents into a file
on your PC, click Save As and save the file to a disk drive.

NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Specifications

General

Brand	NETGEAR
Model	WG302 - 802.11g ProSafe Wireless Access Point
Category	Wireless Access Point
Language	English