NETGEAR WG302 - 802.11g ProSafe Wireless Access Point User Manual

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Basic Installation and Configuration 3-13
July 2005 v3.0
• Spanning Tree Protocol
Spanning Tree Protocol in enabled by default for the wireless access point. This provides
network traffic optimization in settings with multiple WG302 Access Points.
•Time Zone
Select the time zone location for your setting.
Note: You must have an Internet connection to get the current time.
Understanding Basic Wireless Settings
To configure the wireless settings of your wireless access point, click the Wireless Settings link in
the Basic section of the main menu of the browser interface. The Basic Wireless Settings menu
will appear, as shown below.
Figure 3-8: Basic Wireless Settings menu
The Basic Wireless Settings menu options are discussed below:
• Country/Region. This field identifies the region where the WG302 can be used. It may not be
legal to operate the wireless features of the wireless access point in a region other than one of
those identified in this field. There is no default country domain, and the channel is set to 11.
Unless a country domain is selected, the channel cannot be changed.

NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Specifications

General

Brand	NETGEAR
Model	WG302 - 802.11g ProSafe Wireless Access Point
Category	Wireless Access Point
Language	English