NETGEAR WG302 - 802.11g ProSafe Wireless Access Point

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Management 4-3
July 2005 v3.0
3.
Press the return key, and the screen below should appear.
Figure 4-2: Secure Telnet Client
The login name is admin and password is the default password.
After successful login, the screen should show the (Access Point Name)> prompt. In this
example, the prompt is netgear74F35E.
Enter help to display the CLI command help..
CLI Commands
The CLI commands are listed in Appendix C, “Command Line Reference.”