NETGEAR WG302 - 802.11g ProSafe Wireless Access Point - Page 55

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Basic Installation and Configuration 3-33
July 2005 v3.0
2.
Click WEP/WPA Settings in the Security menu of the WG302.
Figure 3-20: WEP/WPA Settings menu
3.
Choose WPA-PSK and WPA2-PSK from the list.
4. Enter the pre-shared key passphrase.
5. Click Apply to save your settings.