Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
Installing the XE102 and the WGX102 3-9
September 2004 202-10042-01
Figure 3-8: Login result in Access Point Mode
4. The WGX102 Wall-Plugged Range Extender is in Access Point Mode by default. For
information on using the WGX102 in Router Mode, see Chapter 4, “Configuring the WGX102
in Router Mode” and Chapter 7, “Content Filtering in Router Mode”.
5. If you do not click Logout, the range extender will wait five minutes after there is no activity
before it automatically logs you out.
To Next Page
Loading...
