Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
4-6 Configuring the WGX102 in Router Mode
September 2004 202-10042-01
Note: If you have trouble connecting to the Internet, see “Basic Installation Troubleshooting Tips”
on page 3-7 to correct basic problems. You can also manually configure your Internet settings, as
described in “Manually Configuring Your Internet Connection” on page 4-7.
6. CONFIGURE YOUR WIRELESS COMPUTERS TO OBTAIN IP ADDRESSES DYNAMICALLY
a. View your computer’s Network Connections and right-click on your LAN connection.
b. Go to the Properties screen and select TCP/IP.
c. Click the Properties button.
d. Select “Obtain an IP address automatically” and “Obtain DNS server address
automatically. Click OK.
e. Click OK again to save your settings.
Note: See Appendix C, “Preparing Your Network” for more information on TCP/IP configuration.
To Next Page
Loading...
