NETGEAR WGX102 User Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
6-2 Maintenance
September 2004 202-10042-01
You can also assign this password to other HomePlug stations on your LAN. Click the Add button
to add a HomePlug Station to the list.
Figure 6-2: Add HomePlug Station screen
To assign the Network Password to other HomePlug Stations:
1. Enter a suitable name for the device. For example, a location identifier can be useful such as
Downstairs, Upstairs, or Garage. This name is only used for your reference.
2. Each HomePlug station has a unique device Passcode (PWD) in the format
xxxx-xxxx-xxxx-xxxx, usually shown on a label on the base or rear. Check each HomePlug
device to find the Passcode to enter.
3. Click Add.
4. On the Wall Plug Settings screen, click the Assign Password button. The Network Password is
then assigned to all the HomePlug stations listed in the table, provided they are currently
connected with a powerline connection.

NETGEAR WGX102 Specifications

Weight and Dimensions

dimensions	3 x 8.6 x 6.5 in, 75 x 220 x166 mm
weight	2.0 lb