NETGEAR WGX102 User Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
6-8 Maintenance
September 2004 202-10042-01
From the Router Status screen, click the Connection Status button to display the connection status,
as shown below.
Figure 6-6: Connection Status screen
This screen shows the following fields:.
Click the Renew button to renew the DHCP lease. Click the Release button to disconnect from the
WA N.
Table 6-1. Connection Status Fields
Field Description
IP Address The WAN (Internet) IP Address assigned to the range extender.
Subnet Mask The WAN (Internet) Subnet Mask assigned to the WGX102.
Default Gateway The WAN (Internet) default gateway the WGX102 communicates with.
DHCP Server The WAN (Internet) DHCP server IP address.
DNS Server The WAN (Internet) DNS server IP addresses on the network.
Lease Obtained The length of time the range extender has been connected to your Internet service
provider’s network.
Lease Expires The length of time before the lease expires.

NETGEAR WGX102 Specifications

Weight and Dimensions

dimensions	3 x 8.6 x 6.5 in, 75 x 220 x166 mm
weight	2.0 lb