Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
7-8 Content Filtering in Router Mode
September 2004 202-10042-01
• Turn e-mail notification on
Select this check box if you wish to receive e-mail logs and alerts from the WGX102.
• Your outgoing mail server
Enter the name of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com). You
may be able to find this information in the configuration menu of your e-mail program. If you
leave this box blank, log and alert messages are not sent via e-mail.
• Send to this e-mail address
Enter the e-mail address to which logs and alerts are sent. This e-mail address is also used as
the From address. If you leave this box blank, log and alert messages are not sent via e-mail.
You can specify that logs are automatically sent to the specified e-mail address with these options:
• Send alert immediately
Select this check box if you would like immediate notification of attempted access to a
blocked site.
• Send logs according to this schedule
Specifies how often to send the logs: Hourly, Daily, Weekly, or When Full.
– Day for sending log
Specifies which day of the week to send the log. Relevant when the log is sent weekly or
daily.
– Time for sending log
Specifies the time of day to send the log. Relevant when the log is sent daily or weekly.
If the Weekly, Daily or Hourly option is selected and the log fills up before the specified
period, the log is automatically e-mailed to the specified e-mail address. After the log is sent,
the log is cleared from the router’s memory. If the router cannot e-mail the log file, the log
buffer may fill up. In this case, the WGX102 overwrites the log and discards its contents.
The WGX102 Wall-Plugged Range Extender uses the Network Time Protocol (NTP) to obtain the
current time and date from one of several Network Time Servers on the Internet. In order to
localize the time for your log entries, you must specify your Time Zone:
•Time Zone
Select your local time zone. This setting is used for the blocking schedule and for
time-stamping log entries.
• Daylight Savings Time
Select this check box if your time zone is currently under daylight savings time.
To Next Page
Loading...
