Manage Your Network
118
N750 WiFi Router
Recover the admin Password
NETGEAR recommends that you enable password recovery if you change the password for
the user name admin. Then you can recover the password if it is forgotten. This recovery
process is supported in Internet Explorer, Firefox, and Chrome browsers but not in the Safari
browser.
To set up password recovery:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password screen displays.
5. Select the Enable Password Recovery check box.
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your changes are saved.
To recover your password:
1. In the address field of your browser, type www.routerlogin.net.
A login screen displays.
2. Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the
router.
The serial number is on the product label.
3. Enter the serial number of the router.
4. Click the Continue button.
A screen displays requesting the answers to your security questions.
5. Enter the saved answers to your security questions.
6. Click the Continue button.
A screen displays your recovered password.
To Next Page
Loading...
Need help?
General
