Netis WF-2406 - Page 37

WF-2406 User Manual
36
Figure 4-13
 WPS Status: you can use this function to setup the wireless connection between this router
and wireless network card. The default is disable.
 AP PIN Code: this code can mark a wireless product
 Wireless Host PIN Code: input the PIN of wireless network card that support WPS
function. Click connect, when it connect successfully, it will be encrypted to WPA2-PSK
 WPS PBC settings: Click connect, when it connect successfully, it will be encrypted to
WPA2-PSK
 WPS Configuration: display the encryption information
WPS can connect the wireless adapter and the router in a safe way. If you have a wireless
network card which has WPS button, you may set up a safe network via the following methods
Method 1:
1. Push the WPS button in the Router until the LED is flashing
2. Push the WPS button in the wireless network card until the following window appears