WF-2406 User Manual
Figure 4-14
3. The next is the safe connection between the adapter and the router, please wait
4. The connect between the adapter and the router is success
Method 2:
1. Push the WPS button in the Router until the LED is flashing
2. Push the „Push button Config (PBC)‟ in the Wi-Fi protect setup of the adapter until the
following picture appears
Figure 4-15
3. The next is the safe connection between the adapter and the router, please wait
4. The connect between the adapter and the router is success
Method 3:
1. Input the PIN code of the adapter‟s WPS page into the router‟s WPS configure page, then
click ‟connect‟
To Next Page
Loading...
