SAFETY INFORMATION
12 Copyright © 1998 New Flyer Industries Ltd.
The Interlock System is intended to protect passengers from an
inadvertent vehicle movement and to protect the articulating joint
from component damage. Located in the entrance door mecha-
nism compartment is a toggle switch labeled Door Master. Use
this switch to disable the System for maintenance purposes or in
an emergency.
Exit Door Sensitive Edges
Mounted to the leading edges of the exit door panels are rubber
seals that are sensitive to pressure. If, while closing the doors,
they strike an object or passenger, a signal from the sensitive
edges sounds an alarm and prompts the doors to fully reopen.
Once they fully open the doors will again close.
☞ NOTE:
The inlock system prevents the vehicle from moving until the exit
door is fully closed.
To Next Page
