INSTRUMENTATION & CONTROLS
Copyright © 1998 New Flyer Industries Ltd. 43
7. INSTRUMENTATION & CONTROLS
Instrument Panel
Turn Indicators (Green)
WARNING:
If the Turn Signal indicators do not operate as
described, DO NOT OPERATE THE VEHICLE.
Directional arrows symbolize the Turn indicators. They flash on
either side of the instrument panel when pressing the right-hand
or left-hand floor-mounted turn signal switch.
When the Hazard switch is activated, both Turn indicators flash
together. Failure of these lights to flash normally indicates that the
flasher module is not functioning.
Do Not Shift Indicator (Amber)
The Do Not Shift indicator illuminates when the Electronic Control
Unit (ECU) has detected a potentially serious problem in the
transmission. DO NOT OPERATE THE VEHICLE.
Hot Trans Indicator (Red)
The Hot Transmission indicator is wired to the transmission con-
trol system. This indicator illuminates and a warning buzzer
sounds when the temperature sensors detect over-heated trans-
mission fluid.
To Next Page
