New Flyer SR542 - Night-Time Operation

VEHICLE OPERATION
Copyright © 1998 New Flyer Industries Ltd. 77
• Parking Brake and Stop Light indicator lights stay on as long
as the parking brake is applied.
• Headlight operation (low beam only).
• Door controller operation.
• The Door Master switch, when placed in the OFF position,
disables the entrance and exit doors and inhibits the
accelerator/brake interlocks.
• Return the Door Master switch to the ON position.
• Wiper and washer controls operation.
• Defroster/heater controls (on dash) operation.
• Interior fluorescent lights can be turned on using the Aisle
Lights switch.
• Exterior lights operate during exterior light test. To conduct test
first position the hazard light toggle switch to ON and then
press both turn switches simultaneously. All exterior lights will
illuminate for two minutes. Reposition the hazard switch to
OFF when the test is complete.
Night-Time Operation
For night operations ensure that the Master Run switch is placed
in the NIGHT-RUN position. Check the following in addition to the
day-time checks:
• Instrument panel illumination lights.
• Front, side and rear destination/route sign lights.
• Headlight operation (high and low beams).
• Front and rear identification and marker lights.
• Rear stop and turn tail lights.
• License plate light.
• Panel lights dimmer changes the brightness of instrumentation
backlights and panel text.