VEHICLE OPERATION
80 Copyright © 1998 New Flyer Industries Ltd.
5. Release the brake treadle and lightly apply the accelerator
treadle to slowly move vehicle from the parking area. The Stop
Lights indicator light extinguishes.
6. Check the steering wheel for vibrations, looseness or binding
while the vehicle is in motion. If any abnormalities are present,
DO NOT OPERATE THE VEHICLE.
Parking the Vehicle
1. Bring the vehicle to a complete stop using the brake treadle.
The Stop Lights indicator light illuminates. Shift the transmis-
sion selector into neutral [N].
2. Apply the parking brake and release the brake treadle. The
Parking Brake indicator light illuminates.
3. Turn the Master Run switch to the STOP-ENGINE position.
4. Slide the driver’s window shut.
5. Open the entrance door by placing the controller in position #2.
6. Exit the vehicle.
7. Locate the front door open switch compartment.
8. Open the compartment access door and move the switch to
close the door.
To Next Page
