EasyManua.ls Logo

New Flyer SR542 - Day-Time Operation

New Flyer SR542
117 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VEHICLE OPERATION
76 Copyright © 1998 New Flyer Industries Ltd.
Shift Selector Display
At engine start-up the shift selector’s red display shows N to indi-
cate that the transmission is in neutral. This should occur auto-
matically at each engine start-up.
No Gen
When illuminated, the No Gen indicator signals that the alternator
is NOT charging. The indicator stays on until the engine starts. If
the indicator fails to stay on until the engine starts, DO NOT
OPERATE THE VEHICLE.
Operator Display Keyboard (ODK) Messages
Check that the destination sign control unit correctly programs
electronic destination sign messages.
Rear Door Open Indicator
Move the door controller to position #3, 4 or 5 to check that the
Rear Door Open indicator light illuminates when the doors open.
NOTE:
Exit doors will open and the interlocks will be engaged.
Turning the door controller handle to Position #1 closes the
entrance and exit doors and extinguishes the Rear Door Open
indicator light. Check that the exit doors are closed. If the exit
doors are not closed and the Rear Door Open indicator is still illu-
minated, DO NOT OPERATE THE VEHICLE.
Day-Time Operation
When the engine is operating check the following:
The air system pressure is between 105 and 125 psi (724 and
862 kPa) and the suspension is at full height. The Air System
requires a working pressure of 105-120 psi (724-827 kPa).
The No Gen indicator light is off when the engine is operating.
Transmission Selector neutral [N] indicator light stays on.

Related product manuals