VEHICLE OPERATION
70 Copyright © 1998 New Flyer Industries Ltd.
CAUTION:
In cold conditions (below -20°F) warm the trans-
mission before operating by positioning the Idle
Speed switch to FAST until the engine reaches
operating temperature.
2. With the engine running and idling at normal speed, apply firm
pressure on the brake treadle and make the desired range
selection.
3. Release park brake and the brake treadle to proceed.
4. To change direction; bring the vehicle to a full stop, apply firm
pressure on the brake treadle and make the desired range
selection.
CAUTION:
Stop the vehicle before shifting from drive [D] to
reverse [R] or vice versa.
☞ NOTE:
A back-up alarm activates when selecting reverse [R].
5. When parking or shutting down the vehicle; come to a full stop,
apply the parking brake select neutral [N]. Release the brake
treadle.
To upshift or downshift the transmission, use the up or down
arrow buttons respectively while in drive [D]. Pressing a button
once changes the gear by one. The red LED display will show the
upshifts or downshifts as the gear number selected.
To Next Page
