New Focus Vortex 6000 Series - *ESE < Value; Set Standard Event Status Enable Register

To Next Page

To Previous Page

38 • Computer Control NEW FOCUS, Inc.

Set Standard Event Status Enable Register

Syntax *ESE <

value>

Vortex Actions Sets the speciﬁed bits of the Event Status Enable

When a corresponding bit in the Standard Event

Status Register becomes true, enables the Event

Summary Bit (ESB) in the Status Byte.

Argument An integer in the range 0 to 255, corresponding to

the combined weight of the bits you want to set.

Example Enable the ESB if the system is restarted:

*ESE 128

Standard Event Status Enable Register

Bit # Weight Description

7 128 Enable ESB in case of power on or

restart.

6 64 not used

5 32 IEEE: enable ESB in case of a com-

mand parse error.

RS-232: not used.

4 16 IEEE: enable ESB in case of “system

not available” or “invalid data”

error.

RS-232: not used.

3 8 not used

2 4 Enable ESB in case of query error.

1 2 not used

0 1 not used

Vortex6000.book Page 38 Tuesday, February 19, 2002 3:25 PM

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com