Introduction
Reference Manual for EL470 IP Satellite Modem
Figure 1: Usage of a Normal Command
The table of description of a 'normal' command is presented below.
Command
<Technical Command
Name – for future use>
<The name of the command, also visualised in the
GUI (Graphical User Interface / Web Interface)>
Location <location of the command>
<This row cautions that this parameter is only available for a certain
hardware configuration or for a certain setting.>
Description <Description of the Command>
RMCP
Command
<RMCP command> For details we
refer to the RMCP manual.
Access Normal user: <read/write
rights>
Expert user: <read/write
rights>
SNMP Table
Comma
nd
OID
Values Factory Default
<factory default:
enumeration>
Enumeration or Unit Value
<mnemonic for first
enumeration>
<mnemonic for second
enumeration>
...
or
<the unit of in which the
value is given>
There are two types of
units:
- command unit: the unit
in which the command is
given
- GUI unit: the unit in
<value enumeration 1>
<value enumeration 2>
...
values are given in
command units
Value can be a:
- discrete e.g. 1
- range e.g. [0..255]
- string e.g. 10.0.0.1
version 3.1
3
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
