Newtec EL470 - Page 196

Modem Reference Manual for EL470 IP Satellite Modem
Command
SyDevModeState
Current device
operating mode
Operating mode
Values Factory Default
normal
Enumeration Value
Normal
Expert
1
2
Command
DmMeasEsNoSat
Es/No level clipping info
Used as
variable of
Command(s)
DmMeasEsNoStruct
Page
160
Description
Readout of the Es/No level clipping information. When reading saturated
values for the Es/No estimation, the clipping info will identify the direction
of saturation or return equal if the value is within range.
Remark: An asterisk indicates that the readout of the Es/No value is about
to saturate and may be not very accurate.
RMCP
Command
Res Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01DemodulatorEntry
Command ntcDevsMod01DmMeasEsNoSat
OID 1.3.6.1.4.1.5835.3.1.13.1.49.1.1
Values Factory Default
equal
Enumeration Value
>
<
*
0
1
2
3
Command
DmMeasEsNo 1
Es/No estimation
Used as
variable of
Command(s)
DmMeasEsNoStruct
Page
160
Description
Readout of the Es/No estimation in dB of the received signal.
RMCP
Command
Ren Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01DemodulatorEntry
Command ntcDevsMod01DmMeasEsNo
OID 1.3.6.1.4.1.5835.3.1.13.1.48.1.1
Values GUI Unit
dB
Cmd Unit Factory Default (CU)
dB 9.83
Expert Range (CU)
-5 .. 25
version 3.1
189
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS