Modem
Reference Manual for EL470 IP Satellite Modem
Variable
IfDPStatsTXMpegPackets
Encap OUT TS Encap OUT TS
Used as
variable of
Command(s)
IfDPStats
Page
139
Description
Variable that contains the number of MPEG-2 transport stream packets
encoded over the last measuring period.
Remark: The measurement can be reset with the command
IfDPStatsReset.
Values GUI Unit
Packets
Cmd Unit Factory Default (CU)
Packets 0
Expert Range (CU)
0 .. 4294967295
Variable
IfDPStatsTXPopTimeouts
Encap IN Pop Encap IN Pop
Used as
variable of
Command(s)
IfDPStats
Page
139
Description
Variable that contains the number of times during encapsulation that an
attempt was made to get Ethernet packets from an input queue but failed
because it was empty over the last period.
Remark: The measurement can be reset with the command
IfDPStatsReset.
Values GUI Unit
Retries
Cmd Unit Factory Default (CU)
Retries 0
Expert Range (CU)
0 .. 4294967295
Variable
IfDPStatsTXPushTimeouts
Encap OUT
Congestion
Encap OUT
Congestion
Used as
variable of
Command(s)
IfDPStats
Page
139
Description
Variable that contains the number of times during encapsulation that an
attempt was made to add MPEG packets to the FPGA output queue but
failed because queue was full over the last period.
Remark: The measurement can be reset with the command
IfDPStatsReset.
Values GUI Unit
Retries
Cmd Unit Factory Default (CU)
Retries 0
Expert Range (CU)
0 .. 4294967295
Variable
IfDPStatsTXIdle
Encap OUT Idle Encap OUT Idle
Used as
variable of
Command(s)
IfDPStats
Page
139
Description
Variable that contains the number of times that an outgoing MPEG-2
transport stream packet was padded with idle bytes (0xFF) during
encapsulation over the last measuring period.
Remark: The measurement can be reset with the command
IfDPStatsReset.
version 3.1
212
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
