Newtec EL470 - Page 251

Modem Reference Manual for EL470 IP Satellite Modem
Command
MoTgTimMode
Testgenerator output
timing mode
Testgen timing mode
Location /Modem/Test/Modulation
Only valid for DVB-S2 modes.
Description
Configuration of the output timing mode on the test generator. The internal
test generator can operate in two timing modes:
• Free running: The output rate is solely controlled by the
programmed test generator bitrate.
• Throttled: The output rate is also throttled using data request pulses
from the modulator.
RMCP
Command
tTm Access Normal user : no access
Expert user : RW
SNMP Table ntcDevsMod01ModulatorEntry
Command ntcDevsMod01MoTgTimMode
OID 1.3.6.1.4.1.5835.3.1.3.1.84.1.1
Values Factory Default
free_running
Enumeration Value
Free running
Throttled
0
1
/Modem/Test/Demodulation
Command
SyTestRst
Test Reset Test Reset
Location /Modem/Test/Demodulation
Description
This command can initiate different reset functions, but this command is
ONLY used for test purposes.
RMCP
Command
STR
array : [1 .. 2]
Access Normal user : no access
Expert user : W
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyTestRst
OID 1.3.6.1.4.1.5835.3.1.1.1.78.1.1.[1 .. 2]
Values Factory Default Enumeration Value
DemodReset
InitForAcq
TunerInit
GlobalReConfig
FpgaReset
1
2
3
4
5
version 3.1
244
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS