Unit Menu
Reference Manual for EL470 IP Satellite Modem
Command
SyDevProdId1
Product identification
number
Product Id
Location /Unit/Architecture
Description
Readout of the product identification number. The product identification
displays the device type, the sub-type (alphanumeric suffix) together with
a short description identifying the product.
RMCP
Command
PId Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyDevProdId
OID 1.3.6.1.4.1.5835.3.1.1.1.25.0.1
Values Factory Default
NA
String Description
length : 0 .. 40
format : any chars
Command
SyDevSn11
Device serial number Device serial number
Location /Unit/Architecture
Description
Readout of the device serial number. Each device has a label at the side
panel that contains the serial number. This number is the same as the
serial number on the label.
RMCP
Command
SLs Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyDevSn
OID 1.3.6.1.4.1.5835.3.1.1.1.31.0.1
Values Factory Default
03051439
String Description
length : 8 (fixed)
format : Hexadecimal chars
Command
SyBucketVersion1
Bucket version Bucket version
Location /Unit/Architecture
Description
Readout of the bucket version. A bucket, used for upgrades, is a subset of
firmwares. The bucket version is a unique value which represents the
group of firmware versions which are present in the bucket. The bucket
version gives a correct idea about the installed firmware versions of all the
boards which can be upgraded by the bucket upgrade tool. Each time a
new upgrade is done, the bucket version will be updated to identify the
new upgrade.
RMCP
Command
Buv Access Normal user : R
Expert user : R
SNMP Table ntcDevsMod01SystemEntry
Command ntcDevsMod01SyBucketVersion
OID 1.3.6.1.4.1.5835.3.1.1.1.87.1.1
version 3.1
37
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
To Next Page
Loading...
