PPA5xx/15xx communications manual
A-2
Keyboard beep on/off, (System options)
0=Off
1=On
Ignore overload,(Acquisition advance options)
0=Off
1=On
Low frequency mode, (Acquisition control)
0=Off
1=On
Window size, (Acquisition control, speed-window)
0=mS
1=Sec’s
Speed, (Acquisition control or Phase meter)
0=Very Slow
1=Slow
2=Medium
3=Fast
4=Very Fast
5=Window
Smoothing (Acquisition Control or Phase Meter)
0=Normal
1=Slow
2=None
Smoothing Response (Acquisition Control or Phase meter)
0=Auto reset
1=Fixed time
Baud rate, (Remote options , RS232)
0=38400
1=19200
2=9600
3=1200
LAN IP address nibble 3, (Remote options - LAN - enter figure as required)
LAN IP address nibble 2, (Remote options - LAN - enter figure as required)