Newtons4th PPA500 - Alarme

PPA5xx/15xx communications manual
2-18
ALARME
ALARME
Function:
Set alarm status enable register
Description:
Sets bits in the alarm status enable
register to control which alarm bit if any
set the alarm active bits in the status
byte.
Format:
ALARME,value
Arguments:
decimal equivalent of alarm bits
bit2 set bit 3 of status byte when
alarm 1 is active
bit3 set bit 3 of status byte when
alarm 2 is active
Reply:
none
Example:
ALARME, 12
*SRE,8
set bit 3 in status byte when either alarm
1 or alarm 2 is active and generate a
service request
Notes:
default value is 0