Newtons4th PPA500 - Page 128

PPA5xx/15xx communications manual
A-16
180
Input ranging channel 3, (Range – autoranging voltage) (Sys independent
ranging enabled)
0=Full Autorange
1=Range up only
2=Manual
181
Input ranging channel 4, (Range – autoranging current) (Sys independent
ranging enabled)
0= Full Autorange
1=Range up only
2=Manual
182
Coupling phase 2, (Coupling) (Sys independent ranging enabled)
0=ac +dc
1=ac
2=dc
184
Scale factor channel 3 voltage, (Ranging - Enter figures as required)(Sys
independent ranging enabled)
185
Scale factor channel 4 current, (Ranging - Enter figures as required) (Sys
independent ranging enabled)
186
External attenuator channel 3,(Ranging – voltage input - attenuator ratio -
Enter figures as required)(Sys independent
ranging enabled)
187
External shunt channel 4, (Ranging – current input – resistance value Enter
figures as required) (Sys independent ranging
enabled)
200
Enable channel 5, (Range – voltage input) (Sys independent ranging enabled)
1=Internal
3=External Attenuator
4=Internal x10
201
Enable channel 6, (Range – current input) (Sys independent ranging enabled)
1=Internal
2=External Shunt
4=Internal x10